Product Detail

BETAFPV-F4-1S-Brushless-Flight-Controller-Frsky-Receiver-Integrated-ESC-OSD-Smart-Audio-for-FPV-Micro-Racing-Drone

BETAFPV F4 1S Brushless Flight Controller Frsky Receiver Integrated ESC OSD Smart Audio for FPV Micro Racing Drone

$39.99 (as of November 2, 2018, 04:59) & FREE Shipping. Details

The default configuration from factory is Frsky D16 mode (FRSKY_X). Built in Frsky receiver is compatible with Taranis, Taranis Plus, X9E, Horus X12S, XJT Modules. In Betaflight Configuration, it should be setted as FRSKY_D receiver (aka Frsky D8 mode) or FRSKY_X receiver (aka Frsky D16 mode) in SPI RX mode.
This is a SPI Frsky receiver. Binding easier than before, no need to click the bind button when power on. Manual: https://betafpv.freshdesk.com/support/solutions/articles/27000021366-how-to-bind-your-radio-transmitter-brushed-fc-board
F411 Processor can reach to 100MHz, much faster than the F3 Flight Controller with 72Mhz. Integrated with Frsky receiver only. You can click here to get the Cli Dump of Beta75pro with the FC: http://support.betafpv.com/support/solutions/articles/27000050395-cli-dump-of-f4-1s-brushless-flight-controller-frsky-version

Usually ships in 24 hours

Compare

Product Description

BETAFPV F4 1S Brushless Flight Controller Frsky Receiver Integrated ESC OSD Smart Audio for FPV Micro Racing Drone

Binding Procedure–Easier than usual. No wish to click the bind button when power on.
a.Power at the board, connecting the battery or USB power. Then the green receiver LED begin to flash.
b.Press the bind button for 3s. Then the green receiver LED will likely be solid on. It means the receiver is in bind mode and you should begin to bind your radio transmitter.
Checking here: https://betafpv.freshdesk.com/Improve/solutions/articles/27000021366-how-to-bind-your-radio-transmitter-brushed-fc-board

Specifiction:
Item: F4 1S Brushless FC Frsky
Firmware version: betaflight_matekf411rx_3.4.0
CPU: STM32F411CEU6 (100MHZ, 256K FLASH)
Six-Axis: MPU-6000 triaxial accelerometer / triaxial gyroscope (SPI connection)
Size: 26mm x 26mm, compatible with the Inductrix quad frame, Beta65 Pro frame, Beta75 Pro frame, Whoop B06 frame and so on
OSD: Built-in BetaFlight OSD (STM32 controls OSD chip over SPI in DMA mode)
Power Cable: 55mm, with JST-PH 2.0 connector, AKA PowerWhoop connector
Weight: 4g
Signal Improve: D-shot150, D-shot300, D-shot600, Oneshot125, Multishot, PWM

Recommend Parts:
Frame: Beta65 Pro / Beta75 Pro frame
https://www.amazon.com/dp/B078GLW4HK
https://www.amazon.com/dp/B078H7R3PV
Props: 31mm 4-Blades / 40mm 4-blades props
https://www.amazon.com/dp/B07D7WSL3L
https://www.amazon.com/dp/B07B2P7TF4
Motors: 0703 / 0603 motors
https://www.amazon.com/dp/B079HXLJJ5
https://www.amazon.com/dp/B078N93QVP
Battery: 550mAh 1S batteries
https://www.amazon.com/dp/B078WR2FVR

Package List:
1 * F4 1S brushless flight controller
4 * M1.2x4mm screws
4 * M1.4x5mm screws
4 * Anti-vibration ruber dampers
The default configuration from factory is Frsky D16 mode (FRSKY_X). Built in Frsky receiver is compatible with Taranis, Taranis Plus, X9E, Horus X12S, XJT Modules. In Betaflight Configuration, it must be setted as FRSKY_D receiver (aka Frsky D8 mode) or FRSKY_X receiver (aka Frsky D16 mode) in SPI RX mode.
It is a SPI Frsky receiver. Binding easier than before, no wish to click the bind button when power on. Manual: https://betafpv.freshdesk.com/Improve/solutions/articles/27000021366-how-to-bind-your-radio-transmitter-brushed-fc-board
F411 Processor can reach to 100MHz, much faster than the F3 Flight Controller with 72Mhz. Integrated with Frsky receiver only. You’ll click here to get the Cli Dump of Beta75pro with the FC: http://Improve.betafpv.com/Improve/solutions/articles/27000050395-cli-dump-of-f4-1s-brushless-flight-controller-frsky-version
Firmware version: betaflight_matekf411rx_3.4.0. Built-in BetaFlight OSD (STM32 controls OSD chip over SPI in DMA mode). Improve Smart Audio.
Some basic guidance and typical FAQ, please check it here : https://betafpv.freshdesk.com/Improve/solutions

We are a participant in the Amazon Services LLC Associates Program, an affiliate advertising program
designed to provide a means for us to earn fees by linking to Amazon.com and affiliated sites.